INTEL DX580G BOX

Form factor

ATX (12.00 inches by 9.60 inches [304.80 millimeters by 243.84 millimeters])

Processor

• Intel® Core™ i7 and Intel® Xeon® Processors in an LGA1366 socket

Memory

• Six 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets

• Support for DDR3 2400 MHz, 2133 MHz, 1866 MHz, 1600 MHz, 1333 MHz, and 1066 MHz DIMMs.

― Speeds over 1600 Mhz via XMP profiles

• Support for up to 24 GB of system memory with 6 DIMMs using 4 Gb memory technology

• Support for ECC and non-ECC memory

• XMP version 1.2

Chipset

Intel® X58 Chipset, consisting of:

• Intel® X58 I/O Hub (IOH)

• Intel® 82801IJR I/O Controller Hub (ICH10R)

Audio

Intel® High Definition Audio subsystem using the Realtek* ALC892 audio codec.

Legacy I/O Control

Winbond W83677HG-I legacy I/O controller for Consumer Infrared (CIR)

BIOS

• Intel® BIOS resident in the Serial Peripheral Interface (SPI) Flash device

• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and System Management BIOS (SMBIOS)

LAN support

Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Intel 82567L Gigabit Ethernet Controller

Peripheral interfaces

• Two USB 3.0 ports are implemented with stacked back panel connectors (blue)

• Twelve USB 2.0 ports

- Six ports are implemented with stacked back panel connectors (black)

- Six front panel ports implemented through four internal headers

• Eight internal SATA interfaces with RAID support

- Two SATA 6 Gb/s interfaces through Marvel 88SE9128 controller (blue)

- Six SATA 3 Gb/s interfaces through the ICH10R (black)

• Two IEEE 1394a ports

- One port via a back panel connector

- One port via an internal header for front panel cabling

Instantly Available PC Technology

• Support for PCI Local Bus Specification Revision 2.2

• Support for PCI Express* Revision 2.0

• Suspend to RAM support

• Wake on PCI, front panel, CIR, and USB ports

Expansion capabilities

• One Conventional PCI* bus add-in card connector (SMBus routed to the Conventional PCI bus add-in card connector)

• Two PCI Express 2.0 x16 bus add-in card connectors

• Three PCI Express 1.1 x1 bus add-in card connectors

Hardware Monitor Subsystem

• Hardware monitoring and fan control ASIC Heceta 6P

• Voltage sense to detect out of range power supply voltages

• Thermal sense to detect out of range thermal values

• Four fan headers using PWM control

• Three fan sense inputs used to monitor fan activity

• Fan speed control using voltage control (4-pin fan headers front and rear)

• Support for Product Environmental Control Interface (PECI)